About Finley Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Finley: Scott County Fire 151.2125 MHz, narrow FM, 127.3 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Scott County Fire talkgroup 21625 (hex 5479).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48, NXDN96), which needs a scanner that decodes those modes.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Finley, start with the Henryville site of Indiana Project Hoosier SAFE-T, about 5 miles away. Its control channels: 854.0375, 854.2375, 854.4125 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Scott County channels that also cover Finley
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Fire | Scott County Fire – Dispatch /Tone Outs | 151.2125 In 155.8725 | 127.3 PL | FMN | WPSH278 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County Fire | Scott County Fire – Operations | 151.2125 In 155.8725 | RAN 14 | NXDN48 | WPSH278 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County EMS | Scott County EMS – Dispatch | 155.1750 In 158.8725 | RAN 15 | NXDN96 Encrypted | WPSH278 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Scott County EMS | Scott County EMS – Tactical Channel | 153.8000 | CSQ | FMN | WPSH278 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Scott County Fire | Scott County Fire – Dispatch | 21625 | 5479 | D |
| Scott County Fire | Scott County Fire – Fire Ground | 21626 | 547a | D |
| Scott County Fire | Scott County Fire – Fire Ground | 21627 | 547b | D |
| Scott County Fire | Scott County Fire – Fire Ground | 21628 | 547c | D |
| Scott County EMS | Scott County EMS – Operations | 21622 | 5476 | D |
| Scott County Hospital | Scott County Hospital – Operations (IHERN) | 21623 | 5477 | D |
Nearest trunked radio sites
Distances are measured from the center of Finley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Finley?
We do not have a fire dispatch channel listed specifically for Finley. The county-level fire dispatch channels in the same county: Scott County Fire 151.2125 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Finley?
Yes. The county-level systems that cover Finley are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Finley?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48, NXDN96 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Finley?
For Finley, start with the Henryville site of Indiana Project Hoosier SAFE-T. Its control channels are 854.0375, 854.2375, 854.4125, 857.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.