About Richland Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Richland: Fire/EMS/Emergency Management 154.4300 MHz, narrow FM, 77.0 PL (old). Trunked: Indiana Project Hoosier SAFE-T, for example Steuben County Fire talkgroup 12667 (hex 317b).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Richland, start with the Angola site of Indiana Project Hoosier SAFE-T, about 10 miles away. Its control channels: 853.45, 853.9125 MHz.
- 1 listed entry is marked encrypted. No scanner can decode encrypted audio.
Data updated .
Steuben County channels that also cover Richland
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management Old | Fire/EMS/Emergency Management – Paging | 154.4300 | 77.0 PL | FMN | WNJG213 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Fire/EMS/Emergency Management | Fire/EMS/Emergency Management – Mutual Aid with De Kalb County | 154.3550 | 77.0 PL | FMN | WNJG213 |
| Fire/EMS/Emergency Management Backup | Emergency Management | 155.0550 In 156.0150 | FMN | KNFM529 | |
| Metz Fire (Angola) | Metz Fire (Angola) – Tactical Channel | 155.8800 | FMN | WPAY773 | |
| Salem Fire (Hudson) | Operations with LaGrange County | 154.3700 | 91.5 PL | FMN | KNGC337 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Steuben Township (Pleasant Lake) | Steuben Township (Pleasant Lake) – Private | 154.7250 | FMN | WPHJ768 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Steuben County Fire | County Fire – Dispatch | 12667 | 317b | D |
| Steuben County EMS | County EMS – Dispatch | 12666 | 317a | D |
1 encrypted talkgroup (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Steuben County Hospital | EMS-to-Hospital ER – MED | 12664 | 3178 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Richland.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Richland?
We do not have a fire dispatch channel listed specifically for Richland. The county-level fire dispatch channels in the same county: Fire/EMS/Emergency Management 154.4300 MHz, narrow FM, 77.0 PL (old).
Do fire departments and EMS use a trunked radio system in Richland?
Yes. The county-level systems that cover Richland are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Richland?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Richland?
For Richland, start with the Angola site of Indiana Project Hoosier SAFE-T. Its control channels are 853.45, 853.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.