Skip to content

York Fire and EMS Frequencies

We do not have frequencies listed specifically for York in Switzerland County, Indiana yet. Countywide channels for Switzerland County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Patriot (Indiana Project Hoosier SAFE-T), about 7 miles away.

About York Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers York: Switzerland County Fire/EMS 151.3550 MHz, narrow FM, 152 DPL. Trunked: Indiana Project Hoosier SAFE-T, for example Switzerland County Fire talkgroup 21652 (hex 5494).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For York, start with the Patriot site of Indiana Project Hoosier SAFE-T, about 7 miles away. Its control channels: 854.3125, 857.7125, 858.7125 MHz.

Data updated .

Switzerland County channels that also cover York

Fire Dispatch

Fire Dispatch frequencies for Switzerland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Switzerland County Fire/EMSJefferson Craig Fire Department151.3550152 DPLFMNWQDJ761
Switzerland County Fire/EMSFire/EMS Dispatch154.0250
In 156.0150
123.0 PLFMNWPXN362
Switzerland County Fire/EMSPosey Fire Department154.9650
In 159.4425
125 DPLFMNWQCK446
Switzerland County Fire/EMSJefferson Craig Fire Department155.9475123.0 PLFMNWQDJ761

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Switzerland County FireSwitzerland County Fire – Dispatch216525494D
Switzerland County FireFireground Operations216485490D
Switzerland County EMSSwitzerland County EMS – Operations21646548eD

Nearest trunked radio sites

Distances are measured from the center of York.

Patriot · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 30 (hex 1E) · NAC 6B2 · about 7 mi away
Control 854.3125, 857.7125, 858.7125
Voice 851.8875
Vevay · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 38 (hex 26) · NAC 6B3 · about 8 mi away
Control 853.675, 853.9625, 854.3375
Voice 851.1, 851.9375
Rising Sun · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 37 (hex 25) · NAC 6B3 · about 11 mi away
Control 853.7375, 856.2125
Voice 853.3125, 853.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in York?

We do not have a fire dispatch channel listed specifically for York. The county-level fire dispatch channels in the same county: Switzerland County Fire/EMS 151.3550 MHz, narrow FM, 152 DPL.

Do fire departments and EMS use a trunked radio system in York?

Yes. The county-level systems that cover York are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in York?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in York?

For York, start with the Patriot site of Indiana Project Hoosier SAFE-T. Its control channels are 854.3125, 857.7125, 858.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.