Skip to content

Liberty Fire and EMS Frequencies

We do not have frequencies listed specifically for Liberty in Tipton County, Indiana yet. Countywide channels for Tipton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Tipton (Indiana Project Hoosier SAFE-T), about 6 miles away.

About Liberty Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Liberty: County Fire/EMS/Emergency Management 154.9800 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Liberty: County Fire/EMS/Emergency Management 155.2200 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example Tipton County Fire talkgroup 12347 (hex 303b).

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Liberty, start with the Tipton site of Indiana Project Hoosier SAFE-T, about 6 miles away. Its control channels: 852.6625, 852.9375 MHz.

Data updated .

Tipton County channels that also cover Liberty

Fire Dispatch

Fire Dispatch frequencies for Tipton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire/EMS/Emergency ManagementTipton Fire154.9800156.7 PLFMNKCT628

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Tipton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire/EMS/Emergency ManagementTipton County Emergency Management154.0550FMNKNFP374
County Fire/EMS/Emergency ManagementCicero Twp. Fireground154.1450100.0 PLFMNWPWX504
County Fire/EMS/Emergency ManagementHobbs Fireground154.2200CSQFMNKNGG536
County Fire/EMS/Emergency ManagementMadison Township Fireground154.2200100.0 PLFMNKNGG536
County Fire/EMS/Emergency ManagementSharpsville and Windfall Fireground154.3850100.0 PLFMNWNVB805
County Fire/EMS/Emergency ManagementTipton city and Kempton Fireground154.4300100.0 PLFMNWNKG574
County Fire/EMS/Emergency ManagementKempton Fireground156.0000FMNWQEB371

EMS Dispatch

EMS Dispatch frequencies for Tipton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire/EMS/Emergency ManagementRural Metro EMS155.2200FMNWPMB966

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Tipton County FireTipton County Fire – Dispatch (County)12347303bD
Tipton County FireTipton County Fire – Talk (County)12348303cD

Nearest trunked radio sites

Distances are measured from the center of Liberty.

Tipton · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 56 (hex 38) · NAC 6B6 · about 6 mi away
Control 852.6625, 852.9375
Voice 851.075, 851.4125, 851.6375, 852.475
Kokomo · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 55 (hex 37) · NAC 6B7 · about 9 mi away
Control 853.8875, 853.9125
Voice 851.8625, 853.3875, 853.4125, 854.3375
Simulcast · Howard County IN Public Safety
RFSS 1 · Site 1 (hex 1) · NAC 734 · about 9 mi away
Control 851.2, 851.3375, 852.125, 852.325, 852.6, 852.85, 853.2125, 853.2875, 854.0625, 854.4875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Liberty?

We do not have a fire dispatch channel listed specifically for Liberty. The county-level fire dispatch channels in the same county: County Fire/EMS/Emergency Management 154.9800 MHz, narrow FM, 156.7 PL.

What frequency does EMS or the ambulance service use in Liberty?

We do not have a EMS dispatch channel listed specifically for Liberty. The county-level EMS dispatch channels in the same county: County Fire/EMS/Emergency Management 155.2200 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Liberty?

Yes. The county-level systems that cover Liberty are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Liberty?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Liberty?

For Liberty, start with the Tipton site of Indiana Project Hoosier SAFE-T. Its control channels are 852.6625, 852.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.