About Wildcat Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Wildcat: County Fire/EMS/Emergency Management 154.9800 MHz, narrow FM, 156.7 PL. County-level ems dispatch that covers Wildcat: County Fire/EMS/Emergency Management 155.2200 MHz, narrow FM, no tone. Trunked: Indiana Project Hoosier SAFE-T, for example Tipton County Fire talkgroup 12347 (hex 303b).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wildcat, start with the Tipton site of Indiana Project Hoosier SAFE-T, about 9 miles away. Its control channels: 852.6625, 852.9375 MHz.
Data updated .
Tipton County channels that also cover Wildcat
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire/EMS/Emergency Management | Tipton Fire | 154.9800 | 156.7 PL | FMN | KCT628 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire/EMS/Emergency Management | Tipton County Emergency Management | 154.0550 | FMN | KNFP374 | |
| County Fire/EMS/Emergency Management | Cicero Twp. Fireground | 154.1450 | 100.0 PL | FMN | WPWX504 |
| County Fire/EMS/Emergency Management | Hobbs Fireground | 154.2200 | CSQ | FMN | KNGG536 |
| County Fire/EMS/Emergency Management | Madison Township Fireground | 154.2200 | 100.0 PL | FMN | KNGG536 |
| County Fire/EMS/Emergency Management | Sharpsville and Windfall Fireground | 154.3850 | 100.0 PL | FMN | WNVB805 |
| County Fire/EMS/Emergency Management | Tipton city and Kempton Fireground | 154.4300 | 100.0 PL | FMN | WNKG574 |
| County Fire/EMS/Emergency Management | Kempton Fireground | 156.0000 | FMN | WQEB371 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire/EMS/Emergency Management | Rural Metro EMS | 155.2200 | FMN | WPMB966 |
Indiana Project Hoosier SAFE-T
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Tipton County Fire | Tipton County Fire – Dispatch (County) | 12347 | 303b | D |
| Tipton County Fire | Tipton County Fire – Talk (County) | 12348 | 303c | D |
Nearest trunked radio sites
Distances are measured from the center of Wildcat.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Wildcat?
We do not have a fire dispatch channel listed specifically for Wildcat. The county-level fire dispatch channels in the same county: County Fire/EMS/Emergency Management 154.9800 MHz, narrow FM, 156.7 PL.
What frequency does EMS or the ambulance service use in Wildcat?
We do not have a EMS dispatch channel listed specifically for Wildcat. The county-level EMS dispatch channels in the same county: County Fire/EMS/Emergency Management 155.2200 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Wildcat?
Yes. The county-level systems that cover Wildcat are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Wildcat?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wildcat?
For Wildcat, start with the Tipton site of Indiana Project Hoosier SAFE-T. Its control channels are 852.6625, 852.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.