Skip to content

Prairie Fire and EMS Frequencies

We do not have frequencies listed specifically for Prairie in Warren County, Indiana yet. Countywide channels for Warren County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Fowler (Indiana Project Hoosier SAFE-T), about 14 miles away.

About Prairie Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Prairie: Fire/EMS/Emergency Management 154.4300 MHz, narrow FM, 107.2 PL. County-level ems dispatch that covers Prairie: Fire/EMS/Emergency Management 151.1075 MHz, narrow FM, 100.0 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Warren County EMS talkgroup 10263 (hex 2817).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Prairie, start with the Fowler site of Indiana Project Hoosier SAFE-T, about 14 miles away. Its control channels: 852.4375, 853.4875 MHz.

Data updated .

Warren County channels that also cover Prairie

Fire Dispatch

Fire Dispatch frequencies for Warren County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Dispatch154.4300
In 159.0525
107.2 PLFMNWPLS514
Fire/EMS/Emergency ManagementPine Village Fire Dispatch155.6700
In 154.0700
186.2 PLFMNWSLK648
Fire/EMS/Emergency Management BackupEmergency Services (WIlliamsport)857.6375
In 812.6375
186.2 PLFMNWQYG207
Fire/EMS/Emergency Management BackupFire/EMS/Emergency Management – Dispatch (WIlliamsport)858.6375
In 813.6375
186.2 PLFMNWQYG207
Fire/EMS/Emergency Management BackupFire/EMS/Emergency Management – Dispatch (Williamsport)859.6375
In 814.6375
186.2 PLFMNWQYG207

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Warren County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Fire Ground / Vehicular Repeaters153.9500CSQFMNWNBX912
Fire/EMS/Emergency ManagementEMA – Operations 2/Tactical153.9650FMNWPZX241
Fire/EMS/Emergency Management BackupEmergency Services (West Lebanon)854.6875
In 809.6875
186.2 PLFMNWSGC285
Fire/EMS/Emergency Management BackupEmergency Services (Pine Village)856.0875
In 811.0875
186.2 PLFMNWSGC285

EMS Dispatch

EMS Dispatch frequencies for Warren County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS/Emergency ManagementFire/EMS/Emergency Management – Tone-Outs/Dispatch151.1075
In 156.0150
100.0 PLFMNWPZX241

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Warren County EMSWarren County EMS – Dispatch (County)102632817D
Warren County EMSWarren County EMS – Operations (County)12428308cD
Warren County HospitalHospital (Patient Reports??)124323090D

Nearest trunked radio sites

Distances are measured from the center of Prairie.

Fowler · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 64 (hex 40) · NAC 6B4 · about 14 mi away
Control 852.4375, 853.4875
Voice 851.4375, 851.9625, 856.4375
Attica · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 67 (hex 43) · NAC 6B8 · about 16 mi away
Control 853.4375, 853.9375
Voice 851.4125, 851.9125, 852.9125, 856.2375
Covington · Indiana Project Hoosier SAFE-T
RFSS 1 · Site 26 (hex 1A) · NAC 6B6 · about 21 mi away
Control 853.3625, 853.9
Voice 851.3625, 852.3625, 852.8625, 855.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Prairie?

We do not have a fire dispatch channel listed specifically for Prairie. The county-level fire dispatch channels in the same county: Fire/EMS/Emergency Management 154.4300 MHz, narrow FM, 107.2 PL.

What frequency does EMS or the ambulance service use in Prairie?

We do not have a EMS dispatch channel listed specifically for Prairie. The county-level EMS dispatch channels in the same county: Fire/EMS/Emergency Management 151.1075 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Prairie?

Yes. The county-level systems that cover Prairie are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Prairie?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Prairie?

For Prairie, start with the Fowler site of Indiana Project Hoosier SAFE-T. Its control channels are 852.4375, 853.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.