Skip to content

Lane Fire and EMS Frequencies

We do not have frequencies listed specifically for Lane in Warrick County, Indiana yet. Countywide channels for Warrick County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Scalesville (Indiana Project Hoosier SAFE-T), about 1 miles away.

About Lane Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lane: Warrick County Fire 154.4450 MHz, narrow FM, 91.5 PL. Trunked: Indiana Project Hoosier SAFE-T, for example Warrick County Fire talkgroup 21675 (hex 54ab).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lane, start with the Scalesville site of Indiana Project Hoosier SAFE-T, about 1 miles away. Its control channels: 852.4, 852.95, 853.4375 MHz.

Data updated .

Warrick County channels that also cover Lane

Fire Dispatch

Fire Dispatch frequencies for Warrick County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Warrick County FireWarrick County Fire – Dispatch154.4450
In 159.3600
91.5 PLFMNWSGG878

Fire Talk-around

Fire Talk-around frequencies for Warrick County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Warrick County FireWarrick County Fire – Talkaround453.687591.5 PLFMNWPUW590

Indiana Project Hoosier SAFE-T

Indiana Project Hoosier SAFE-T talkgroups
AgencyDescriptionTalkgroupHexMode
Warrick County FireWarrick County Fire – Dispatch2167554abD
Warrick County FireWarrick County Fire – Fire Ground2167654acD
Warrick County FireWarrick County Fire – Fire Ground2167754adD
Warrick County FireWarrick County Fire – Fire Ground2167854aeD
Warrick County FireWarrick County Fire – Fire Ground2167954afD
Warrick County EMSWarrick County EMS – Dispatch2167354a9D
Warrick County EMSWarrick County EMS – Operations2167454aaD

Nearest trunked radio sites

Distances are measured from the center of Lane.

Scalesville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 26 (hex 1A) · NAC 6B2 · about 1 mi away
Control 852.4, 852.95, 853.4375
Voice 851.4
Augusta · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 68 (hex 44) · NAC 6B6 · about 9 mi away
Control 853.9, 859.9875
Voice 851.2625, 852.8625, 853.325
Evansville · Indiana Project Hoosier SAFE-T
RFSS 2 · Site 25 (hex 19) · NAC 6B2 · about 11 mi away
Control 853.9125, 854.0625
Voice 851.6125, 852.4375, 853.5125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lane?

We do not have a fire dispatch channel listed specifically for Lane. The county-level fire dispatch channels in the same county: Warrick County Fire 154.4450 MHz, narrow FM, 91.5 PL.

Do fire departments and EMS use a trunked radio system in Lane?

Yes. The county-level systems that cover Lane are Fire and EMS talkgroups are listed for Indiana Project Hoosier SAFE-T: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lane?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lane?

For Lane, start with the Scalesville site of Indiana Project Hoosier SAFE-T. Its control channels are 852.4, 852.95, 853.4375 MHz. Program a control channel first; the scanner finds the voice channels from it.