Skip to content

Hayfield Fire and EMS Frequencies

We do not have frequencies listed specifically for Hayfield in Hancock County, Iowa yet. Countywide channels for Hancock County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Garner (Iowa Statewide Interoperable Communications System (ISICS)), about 5 miles away.

About Hayfield Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Hayfield: Hancock County Fire 154.4450 MHz, FM, no tone. County-level ems dispatch that covers Hayfield: Hancock County EMS 155.0400 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Hancock County Fire talkgroup 31311 (hex 7a4f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Hancock County channels that also cover Hayfield

Fire Dispatch

Fire Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County FireHancock County Fire – Dispatch154.4450FMWNLX693

EMS Dispatch

EMS Dispatch frequencies for Hancock County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hancock County EMSCounty EMS155.0400FMKDA710

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Hancock County FireHancock County Fire – Dispatch313117a4fT
Hancock County FireHancock County Fire – Tactical Channel313127a50T
Hancock County FireHancock County Fire – Tactical Channel313137a51T
Hancock County EMSHancock County EMS – Dispatch313147a52T
Hancock County EMSHancock County EMS – Tactical Channel313157a53T
Hancock County EMSHancock County EMS – Tactical Channel313167a54T
Hancock County HospitalHancock County Health Systems313177a55T
Hancock County HospitalHancock County Health Systems313187a56T

Nearest trunked radio sites

Distances are measured from the center of Hayfield.

Garner · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 41 (hex 29) · about 5 mi away
Voice 772.06875, 772.38125, 772.70625, 774.69375
Leland · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 92 (hex 5C) · NAC 4C2 · about 14 mi away
Control 773.78125, 774.03125, 774.28125
Voice 773.03125, 773.53125
Joice · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 98 (hex 62) · NAC 4C2 · about 21 mi away
Control 770.94375, 774.56875, 774.81875
Voice 770.69375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Hayfield?

We do not have a fire dispatch channel listed specifically for Hayfield. The county-level fire dispatch channels in the same county: Hancock County Fire 154.4450 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Hayfield?

We do not have a EMS dispatch channel listed specifically for Hayfield. The county-level EMS dispatch channels in the same county: Hancock County EMS 155.0400 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Hayfield?

Yes. The county-level systems that cover Hayfield are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Hayfield?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Hayfield?

For Hayfield, start with the Leland site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.78125, 774.03125, 774.28125 MHz. Program a control channel first; the scanner finds the voice channels from it.