About Hutchins Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hutchins: Hancock County Fire 154.4450 MHz, FM, no tone. County-level ems dispatch that covers Hutchins: Hancock County EMS 155.0400 MHz, FM, no tone. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Hancock County Fire talkgroup 31311 (hex 7a4f).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
Data updated .
Hancock County channels that also cover Hutchins
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hancock County Fire | Hancock County Fire – Dispatch | 154.4450 | FM | WNLX693 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hancock County EMS | County EMS | 155.0400 | FM | KDA710 |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hancock County Fire | Hancock County Fire – Dispatch | 31311 | 7a4f | T |
| Hancock County Fire | Hancock County Fire – Tactical Channel | 31312 | 7a50 | T |
| Hancock County Fire | Hancock County Fire – Tactical Channel | 31313 | 7a51 | T |
| Hancock County EMS | Hancock County EMS – Dispatch | 31314 | 7a52 | T |
| Hancock County EMS | Hancock County EMS – Tactical Channel | 31315 | 7a53 | T |
| Hancock County EMS | Hancock County EMS – Tactical Channel | 31316 | 7a54 | T |
| Hancock County Hospital | Hancock County Health Systems | 31317 | 7a55 | T |
| Hancock County Hospital | Hancock County Health Systems | 31318 | 7a56 | T |
Nearest trunked radio sites
Distances are measured from the center of Hutchins.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hutchins?
We do not have a fire dispatch channel listed specifically for Hutchins. The county-level fire dispatch channels in the same county: Hancock County Fire 154.4450 MHz, FM, no tone.
What frequency does EMS or the ambulance service use in Hutchins?
We do not have a EMS dispatch channel listed specifically for Hutchins. The county-level EMS dispatch channels in the same county: Hancock County EMS 155.0400 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Hutchins?
Yes. The county-level systems that cover Hutchins are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hutchins?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hutchins?
For Hutchins, start with the Burt site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 769.91875, 770.16875, 770.41875 MHz. Program a control channel first; the scanner finds the voice channels from it.