Skip to content

Lowell Fire and EMS Frequencies

We do not have frequencies listed specifically for Lowell in Henry County, Iowa yet. Countywide channels for Henry County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Beaverdale (Iowa Statewide Interoperable Communications System (ISICS)), about 16 miles away.

About Lowell Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lowell: Henry County Fire 154.4000 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Lowell: Health Center 155.2350 MHz, narrow FM, CSQ.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Henry County channels that also cover Lowell

Fire Dispatch

Fire Dispatch frequencies for Henry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Henry County FireHenry County Fire – Dispatch154.4000
In 159.4275
146.2 PLFMNWNKA960

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Henry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hillsboro Fire and Rescue Expired: Expired 7/15Hillsboro Fire and Rescue – Fire Ground155.7150FMNWQCV214

EMS Dispatch

EMS Dispatch frequencies for Henry County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Health CenterHealth Center – Dispatch – 146.2 PL used on mobiles155.2350CSQFMNWRE386

Nearest trunked radio sites

Distances are measured from the center of Lowell.

Beaverdale · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 11 (hex B) · NAC 4C3 · about 16 mi away
Control 773.84375, 774.09375, 774.34375
Lee Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 56 (hex 38) · NAC 4C1 · about 16 mi away
Control 857.9875
Voice 855.2375, 855.7375, 856.4875
Keosauqua · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 50 (hex 32) · about 27 mi away
Control 773.83125, 774.08125, 774.33125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lowell?

We do not have a fire dispatch channel listed specifically for Lowell. The county-level fire dispatch channels in the same county: Henry County Fire 154.4000 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Lowell?

We do not have a EMS dispatch channel listed specifically for Lowell. The county-level EMS dispatch channels in the same county: Health Center 155.2350 MHz, narrow FM, CSQ.

What scanner do I need to listen to fire and EMS in Lowell?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Lowell?

For Lowell, start with the Beaverdale site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 773.84375, 774.09375, 774.34375 MHz. Program a control channel first; the scanner finds the voice channels from it.