Skip to content

Denmark Fire and EMS Frequencies

Denmark in Lee County, Iowa has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Lee Co Simulcast (Iowa Statewide Interoperable Communications System (ISICS)), about 11 miles away.

About Denmark Fire and EMS Frequencies

Quick answer: Fire dispatch for Denmark: Denmark Fire 153.9800 MHz, narrow FM, 203.5 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Lee County Fire talkgroup 37510 (hex 9286).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Denmark, start with the Lee Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS), about 11 miles away. Its control channels: 857.9875 MHz.

Data updated .

Denmark conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Denmark
AgencyDescriptionFrequency (MHz)ToneModeFCC
Denmark FireDenmark Fire – Dispatch153.9800203.5 PLFMNWQL906

Lee County channels that also cover Denmark

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jackson Township (Keokuk)Jackson Township (Keokuk) – Operations154.1750703 DPLFMNWQM646

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Lee County FireFire Operations375109286T
Lee County FireFire Paging37533929dT
Lee County EMSLee County EMS – Dispatch37516928cT
Lee County EMSEMS ROAM375229292T

Nearest trunked radio sites

Distances are measured from the center of Denmark.

Lee Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 56 (hex 38) · NAC 4C1 · about 11 mi away
Control 857.9875
Voice 855.2375, 855.7375, 856.4875
Beaverdale · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 11 (hex B) · NAC 4C3 · about 17 mi away
Control 773.84375, 774.09375, 774.34375
Keosauqua · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 50 (hex 32) · about 32 mi away
Control 773.83125, 774.08125, 774.33125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Denmark?

Fire dispatch channels listed for Denmark: Denmark Fire 153.9800 MHz, narrow FM, 203.5 PL.

Do fire departments and EMS use a trunked radio system in Denmark?

Yes. The county-level systems that cover Denmark are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Denmark?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Denmark?

For Denmark, start with the Lee Co Simulcast site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 857.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Denmark fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Denmark are marked encrypted.