Skip to content

Fairport Fire and EMS Frequencies

We do not have frequencies listed specifically for Fairport in Muscatine County, Iowa yet. Countywide channels for Muscatine County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Muscatine - Wildcat Den State Park (Iowa Statewide Interoperable Communications System (ISICS)), about 3 miles away.

About Fairport Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fairport: Muscatine County Fire 154.1750 MHz, narrow FM, 167.9 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Muscatine County Fire talkgroup 45229 (hex b0ad).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Fairport, start with the Muscatine - Wildcat Den State Park site of Iowa Statewide Interoperable Communications System (ISICS), about 3 miles away. Its control channels: 853.625 MHz.

Data updated .

Muscatine County channels that also cover Fairport

Fire Dispatch

Fire Dispatch frequencies for Muscatine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Muscatine County FireFire Paging154.1750167.9 PLFMNWPJJ754

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Muscatine County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Muscatine County FireFire Operations154.1750DMR—

Iowa Statewide Interoperable Communications System (ISICS)

Iowa Statewide Interoperable Communications System (ISICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Muscatine County FireCounty Fire45229b0adT
Muscatine County FireMuscatine County Fire – Fire Ground45223b0a7T
Muscatine County FireMuscatine County Fire – Fire Ground45224b0a8T
Muscatine County FireMuscatine County Fire – Fire Ground45225b0a9T
Muscatine County HospitalUnityPoint Trinity Muscatine Medical Control45235b0b3T

Nearest trunked radio sites

Distances are measured from the center of Fairport.

Muscatine - Wildcat Den State Park · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 147 (hex 93) · about 3 mi away
Control 853.625
Voice 851.65, 852.1125, 852.6375
Muscatine · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 2 · Site 140 (hex 8C) · NAC 4C2 · about 5 mi away
Control 857.1375
Voice 854.1875, 854.5375, 854.7125
Muscatine/Scott Co Simulcast · Iowa Statewide Interoperable Communications System (ISICS)
RFSS 1 · Site 14 (hex E) · NAC 4C0 · about 9 mi away
Control 773.83125, 774.08125, 774.33125
Voice 773.58125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Fairport?

We do not have a fire dispatch channel listed specifically for Fairport. The county-level fire dispatch channels in the same county: Muscatine County Fire 154.1750 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Fairport?

Yes. The county-level systems that cover Fairport are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Fairport?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Fairport?

For Fairport, start with the Muscatine - Wildcat Den State Park site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 853.625 MHz. Program a control channel first; the scanner finds the voice channels from it.