About Kent Estates Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Kent Estates: Muscatine County Fire 154.1750 MHz, narrow FM, 167.9 PL. Trunked: Iowa Statewide Interoperable Communications System (ISICS), for example Muscatine County Fire talkgroup 45229 (hex b0ad).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Kent Estates, start with the Muscatine site of Iowa Statewide Interoperable Communications System (ISICS), about 2 miles away. Its control channels: 857.1375 MHz.
Data updated .
Muscatine County channels that also cover Kent Estates
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Muscatine County Fire | Fire Paging | 154.1750 | 167.9 PL | FMN | WPJJ754 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Muscatine County Fire | Fire Operations | 154.1750 | DMR | — |
Iowa Statewide Interoperable Communications System (ISICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Muscatine County Fire | County Fire | 45229 | b0ad | T |
| Muscatine County Fire | Muscatine County Fire – Fire Ground | 45223 | b0a7 | T |
| Muscatine County Fire | Muscatine County Fire – Fire Ground | 45224 | b0a8 | T |
| Muscatine County Fire | Muscatine County Fire – Fire Ground | 45225 | b0a9 | T |
| Muscatine County Hospital | UnityPoint Trinity Muscatine Medical Control | 45235 | b0b3 | T |
Nearest trunked radio sites
Distances are measured from the center of Kent Estates.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kent Estates?
We do not have a fire dispatch channel listed specifically for Kent Estates. The county-level fire dispatch channels in the same county: Muscatine County Fire 154.1750 MHz, narrow FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Kent Estates?
Yes. The county-level systems that cover Kent Estates are Fire and EMS talkgroups are listed for Iowa Statewide Interoperable Communications System (ISICS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Kent Estates?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Kent Estates?
For Kent Estates, start with the Muscatine site of Iowa Statewide Interoperable Communications System (ISICS). Its control channels are 857.1375 MHz. Program a control channel first; the scanner finds the voice channels from it.