About La Harpe Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers La Harpe: Allen County Fire 460.6000 MHz, narrow FM, 91.5 PL. County-level ems dispatch that covers La Harpe: Allen County EMS 463.1750 MHz, narrow FM, 192.8 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Allen County channels that also cover La Harpe
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Allen County Fire | Allen County Fire – Dispatch | 460.6000 In 465.6000 | 91.5 PL | FMN | WPIT496 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Allen County EMS | Allen County EMS – Dispatch | 463.1750 In 468.1750 | 192.8 PL | FMN | WNAH460 |
Nearest trunked radio sites
Distances are measured from the center of La Harpe.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in La Harpe?
We do not have a fire dispatch channel listed specifically for La Harpe. The county-level fire dispatch channels in the same county: Allen County Fire 460.6000 MHz, narrow FM, 91.5 PL.
What frequency does EMS or the ambulance service use in La Harpe?
We do not have a EMS dispatch channel listed specifically for La Harpe. The county-level EMS dispatch channels in the same county: Allen County EMS 463.1750 MHz, narrow FM, 192.8 PL.
What scanner do I need to listen to fire and EMS in La Harpe?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in La Harpe?
For La Harpe, start with the Xenia site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.625, 852.2 MHz. Program a control channel first; the scanner finds the voice channels from it.