Skip to content

Garnett Fire and EMS Frequencies

Garnett in Anderson County, Kansas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Garnett (Kansas Statewide Interoperable Communication System (KSICS)), about 4 miles away.

About Garnett Fire and EMS Frequencies

Quick answer: Fire dispatch for Garnett: Garnett Fire 151.4600 MHz, narrow FM, no tone. County-level ems dispatch that covers Garnett: Anderson County EMS 463.0750 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Anderson County Fire talkgroup 2797 (hex aed).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Garnett, start with the Garnett site of Kansas Statewide Interoperable Communication System (KSICS), about 4 miles away. Its control channels: 854.4125, 854.6625 MHz.

Data updated .

Garnett conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Garnett
AgencyDescriptionFrequency (MHz)ToneModeFCC
Garnett FireGarnett Fire – Dispatch151.4600
In 154.3700
FMNKIL414

Anderson County channels that also cover Garnett

Fire Dispatch

Fire Dispatch frequencies for Anderson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anderson County FireAnderson County Fire – Dispatch (before KSICS)155.3850FMNWPZK574
Anderson County FireAnderson County Fire – Tactical Channel (before KSICS)155.5950205 DPLFMNWPZK574

EMS Dispatch

EMS Dispatch frequencies for Anderson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Anderson County EMSAnderson County EMS – Dispatch (before KSICS)463.0750
In 468.0750
156.7 PLFMN—

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Anderson County FireFire and EMS Dispatch2797aedD
Anderson County EMSCounty EMS – On Scene2799aefD

Nearest trunked radio sites

Distances are measured from the center of Garnett.

Garnett · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 66 (hex 42) · NAC 1B0 · about 4 mi away
Control 854.4125, 854.6625
Voice 854.1625, 856.4375, 857.0375, 857.4625
Parker · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 7 (hex 7) · NAC 1BA · about 15 mi away
Control 851.7125, 852.4875
Voice 851.4625, 852.15, 852.775, 853.425, 853.575, 853.725
Rantoul · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 51 (hex 33) · NAC 1B1 · about 16 mi away
Control 856.6375, 857.5375
Voice 856.0625, 856.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Garnett?

Fire dispatch channels listed for Garnett: Garnett Fire 151.4600 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Garnett?

We do not have a EMS dispatch channel listed specifically for Garnett. The county-level EMS dispatch channels in the same county: Anderson County EMS 463.0750 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Garnett?

Yes. The county-level systems that cover Garnett are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Garnett?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Garnett?

For Garnett, start with the Garnett site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 854.4125, 854.6625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Garnett fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Garnett are marked encrypted.