About Washington Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Washington: Anderson County Fire 155.3850 MHz, narrow FM, no tone. County-level ems dispatch that covers Washington: Anderson County EMS 463.0750 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Anderson County Fire talkgroup 2797 (hex aed).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Washington, start with the Garnett site of Kansas Statewide Interoperable Communication System (KSICS), about 3 miles away. Its control channels: 854.4125, 854.6625 MHz.
Data updated .
Anderson County channels that also cover Washington
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anderson County Fire | Anderson County Fire – Dispatch (before KSICS) | 155.3850 | FMN | WPZK574 | |
| Anderson County Fire | Anderson County Fire – Tactical Channel (before KSICS) | 155.5950 | 205 DPL | FMN | WPZK574 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Anderson County EMS | Anderson County EMS – Dispatch (before KSICS) | 463.0750 In 468.0750 | 156.7 PL | FMN | — |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Anderson County Fire | Fire and EMS Dispatch | 2797 | aed | D |
| Anderson County EMS | County EMS – On Scene | 2799 | aef | D |
Nearest trunked radio sites
Distances are measured from the center of Washington.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Washington?
We do not have a fire dispatch channel listed specifically for Washington. The county-level fire dispatch channels in the same county: Anderson County Fire 155.3850 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Washington?
We do not have a EMS dispatch channel listed specifically for Washington. The county-level EMS dispatch channels in the same county: Anderson County EMS 463.0750 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Washington?
Yes. The county-level systems that cover Washington are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Washington?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Washington?
For Washington, start with the Garnett site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 854.4125, 854.6625 MHz. Program a control channel first; the scanner finds the voice channels from it.