About Lancaster Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lancaster: Atchison County Fire 39.5800 MHz, FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Atchison (City) - Atchison County talkgroup 4883 (hex 1313).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Lancaster, start with the Huron site of Kansas Statewide Interoperable Communication System (KSICS), about 7 miles away. Its control channels: 852.4875, 852.775 MHz.
Data updated .
Atchison County channels that also cover Lancaster
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Atchison County Fire | Rural Fire Paging | 39.5800 | FM | KAE695 | |
| Atchison County Fire | Rural Fire Dispatch | 153.7700 | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Atchison County Fire | Rural Fire Tactical | 154.1300 | FMN | — | |
| Atchison County Fire | Atchison County Fire – Fire Ground | 154.9050 | FMN | WPSG555 | |
| Atchison County Fire | Rural Fire / EMS / Emergency Preparedness | 453.3000 In 458.3000 | 155 DPL | FMN | WPEC577 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Atchison (City) - Atchison County | Atchison (City) – Atchison County – Dispatch | 4883 | 1313 | D |
| Atchison County Fire | Rural Fire Dispatch | 4886 | 1316 | D |
| Atchison County Fire | Rural Fire Tactical | 4887 | 1317 | D |
| Atchison County EMS | Atchison County EMS – Dispatch | 4429 | 114d | D |
Nearest trunked radio sites
Distances are measured from the center of Lancaster.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lancaster?
We do not have a fire dispatch channel listed specifically for Lancaster. The county-level fire dispatch channels in the same county: Atchison County Fire 39.5800 MHz, FM, no tone.
Do fire departments and EMS use a trunked radio system in Lancaster?
Yes. The county-level systems that cover Lancaster are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lancaster?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lancaster?
For Lancaster, start with the Huron site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.