About Timberhill Fire and EMS Frequencies
Quick answer: County-level ems dispatch that covers Timberhill: Bourbon County EMS 155.5650 MHz, DMR, CC 11 · TG 430012 · SL 2. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Bourbon County EMS talkgroup 614 (hex 266).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Timberhill, start with the Xenia site of Kansas Statewide Interoperable Communication System (KSICS), about 8 miles away. Its control channels: 851.625, 852.2 MHz.
Data updated .
Bourbon County channels that also cover Timberhill
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bourbon County Fire | Fire District 3 Tactical | 150.7900 | 82.5 PL | FMN | WQCV858 |
| Bourbon County Fire | Fire District 3 Tactical | 158.7600 | 82.5 PL | FMN | WQCV858 |
| Bourbon County Fire | Rural Fire Dispatch / Emergency Management | 159.1200 In 154.8300 | 82.5 PL | FMN | KNFP357 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bourbon County EMS | Bourbon County EMS – Dispatch | 155.5650 In 158.9100 | CC 11 · TG 430012 · SL 2 | DMR | KAC980 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bourbon County EMS | Bourbon County EMS – Dispatch | 614 | 266 | D |
Nearest trunked radio sites
Distances are measured from the center of Timberhill.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does EMS or the ambulance service use in Timberhill?
We do not have a EMS dispatch channel listed specifically for Timberhill. The county-level EMS dispatch channels in the same county: Bourbon County EMS 155.5650 MHz, DMR, CC 11 · TG 430012 · SL 2.
Do fire departments and EMS use a trunked radio system in Timberhill?
Yes. The county-level systems that cover Timberhill are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Timberhill?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Timberhill?
For Timberhill, start with the Xenia site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.625, 852.2 MHz. Program a control channel first; the scanner finds the voice channels from it.