Skip to content

Freedom Fire and EMS Frequencies

We do not have frequencies listed specifically for Freedom in Bourbon County, Kansas yet. Countywide channels for Bourbon County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Xenia (Kansas Statewide Interoperable Communication System (KSICS)), about 13 miles away.

About Freedom Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Freedom: Bourbon County EMS 155.5650 MHz, DMR, CC 11 · TG 430012 · SL 2. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Bourbon County EMS talkgroup 614 (hex 266).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Freedom, start with the Xenia site of Kansas Statewide Interoperable Communication System (KSICS), about 13 miles away. Its control channels: 851.625, 852.2 MHz.

Data updated .

Bourbon County channels that also cover Freedom

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Bourbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bourbon County FireFire District 3 Tactical150.790082.5 PLFMNWQCV858
Bourbon County FireFire District 3 Tactical158.760082.5 PLFMNWQCV858
Bourbon County FireRural Fire Dispatch / Emergency Management159.1200
In 154.8300
82.5 PLFMNKNFP357

EMS Dispatch

EMS Dispatch frequencies for Bourbon County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Bourbon County EMSBourbon County EMS – Dispatch155.5650
In 158.9100
CC 11 · TG 430012 · SL 2DMRKAC980

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Bourbon County EMSBourbon County EMS – Dispatch614266D

Nearest trunked radio sites

Distances are measured from the center of Freedom.

Xenia · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 10 (hex A) · NAC 1BB · about 13 mi away
Control 851.625, 852.2
Voice 851.375, 852.55, 853.175, 853.3, 853.675
Parker · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 7 (hex 7) · NAC 1BA · about 24 mi away
Control 851.7125, 852.4875
Voice 851.4625, 852.15, 852.775, 853.425, 853.575, 853.725
Garnett · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 66 (hex 42) · NAC 1B0 · about 31 mi away
Control 854.4125, 854.6625
Voice 854.1625, 856.4375, 857.0375, 857.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Freedom?

We do not have a EMS dispatch channel listed specifically for Freedom. The county-level EMS dispatch channels in the same county: Bourbon County EMS 155.5650 MHz, DMR, CC 11 · TG 430012 · SL 2.

Do fire departments and EMS use a trunked radio system in Freedom?

Yes. The county-level systems that cover Freedom are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Freedom?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Freedom?

For Freedom, start with the Xenia site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.625, 852.2 MHz. Program a control channel first; the scanner finds the voice channels from it.