About Sheridan Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Sheridan: Linn County Fire 154.1900 MHz, NXDN48, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Linn County EMS talkgroup 688 (hex 2b0).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Sheridan, start with the Xenia site of Kansas Statewide Interoperable Communication System (KSICS), about 20 miles away. Its control channels: 851.625, 852.2 MHz.
Data updated .
Linn County channels that also cover Sheridan
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Fire | Linn County Fire – Dispatch | 154.1900 In 158.7825 | NXDN48 | WPZR391 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Linn County Fire | Linn County Fire – Fire Ground | 153.9500 In 155.9025 | 115 DPL | FMN | WPZR391 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Linn County EMS | Linn County EMS – Dispatch | 688 | 2b0 | D |
| Linn County EMS | Linn County EMS – Tactical Channel | 689 | 2b1 | D |
Nearest trunked radio sites
Distances are measured from the center of Sheridan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Sheridan?
We do not have a fire dispatch channel listed specifically for Sheridan. The county-level fire dispatch channels in the same county: Linn County Fire 154.1900 MHz, NXDN48, no tone.
Do fire departments and EMS use a trunked radio system in Sheridan?
Yes. The county-level systems that cover Sheridan are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Sheridan?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Sheridan?
For Sheridan, start with the Xenia site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.625, 852.2 MHz. Program a control channel first; the scanner finds the voice channels from it.