Skip to content

Chelsea Fire and EMS Frequencies

We do not have frequencies listed specifically for Chelsea in Butler County, Kansas yet. Countywide channels for Butler County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Cassody (Kansas Statewide Interoperable Communication System (KSICS)), about 9 miles away.

About Chelsea Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Chelsea: Butler County Fire 155.8200 MHz, narrow FM, 146.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Butler County Fire talkgroup 2269 (hex 8dd).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 21 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Chelsea, start with the Cassody site of Kansas Statewide Interoperable Communication System (KSICS), about 9 miles away. Its control channels: 856.9375, 857.2375 MHz.

Data updated .

Butler County channels that also cover Chelsea

Fire Dispatch

Fire Dispatch frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County FireFire and EMS Page Out155.8200
In 158.8050
146.2 PLFMNKAO312

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Butler County FireButler County Fire – Dispatch22698ddD
Butler County FireFire Event22708deD
Butler County FireFire Event22718dfD
Butler County FireFire Event22728e0D
Butler County FireFire Event22738e1D
Butler County FireFire Event22748e2D
Butler County FireFire Event22758e3D
Butler County FireFire Event22768e4D
Butler County FireFire Event22778e5D
Butler County Fire911 Emergency22798e7D
Butler County FireAtlanta Fire Operations2323913D
Butler County FireBurns Fire Operations233491eD
Butler County FireRefinery Fire Operations236493cD
Butler County FireFire and EMS All Call2425979D
Butler County EMSButler County EMS – Dispatch22938f5D
Butler County EMSEMS Division 1 Call Channel22948f6D
Butler County EMSEMS Division 2 Call Channel22958f7D
Butler County EMSCar-to-Car22978f9D
Butler County EMSEMS Administration22968f8D
Butler County EMSSusan B. Allen Memorial Hospital Emergency Room – Patient Reports22998fbD
Butler County EMSKansas Medical Center Emergency Room – Patient Reports23008fcD

Nearest trunked radio sites

Distances are measured from the center of Chelsea.

Cassody · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 44 (hex 2C) · NAC 1BE · about 9 mi away
Control 856.9375, 857.2375
Voice 856.4375, 857.7625, 858.2375, 858.7625
Butler County · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 38 (hex 26) · NAC 1BC · about 14 mi away
Control 851.425, 851.7375
Voice 851.325, 851.825, 852.0625, 852.3875, 852.8375, 853.375, 853.675, 853.825
Cottonwood Falls · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 14 (hex E) · NAC 1B0 · about 26 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Chelsea?

We do not have a fire dispatch channel listed specifically for Chelsea. The county-level fire dispatch channels in the same county: Butler County Fire 155.8200 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Chelsea?

Yes. The county-level systems that cover Chelsea are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 21 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Chelsea?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Chelsea?

For Chelsea, start with the Cassody site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.9375, 857.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.