About Salem Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Salem: Greenwood County Fire 453.1500 MHz, narrow FM, no tone. County-level ems dispatch that covers Salem: Greenwood County EMS 463.1000 MHz, narrow FM, 131.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Greenwood County Fire talkgroup 2539 (hex 9eb).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Salem, start with the Cassody site of Kansas Statewide Interoperable Communication System (KSICS), about 12 miles away. Its control channels: 856.9375, 857.2375 MHz.
Data updated .
Greenwood County channels that also cover Salem
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenwood County Fire | South Dispatch | 453.1500 In 458.1500 | FMN | WPYE256 | |
| Greenwood County Fire | North Dispatch | 453.6625 In 458.6625 | FMN | WPYE256 | |
| Greenwood County Fire | Central Dispatch | 460.1000 In 465.1000 | FMN | WPYE256 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenwood County EMS | Greenwood County EMS – Dispatch | 463.1000 In 468.1000 | 131.8 PL | FMN | WPGE656 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Greenwood County Fire | County Fire and EMS Dispatch | 2539 | 9eb | D |
Nearest trunked radio sites
Distances are measured from the center of Salem.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Salem?
We do not have a fire dispatch channel listed specifically for Salem. The county-level fire dispatch channels in the same county: Greenwood County Fire 453.1500 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Salem?
We do not have a EMS dispatch channel listed specifically for Salem. The county-level EMS dispatch channels in the same county: Greenwood County EMS 463.1000 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Salem?
Yes. The county-level systems that cover Salem are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Salem?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Salem?
For Salem, start with the Cassody site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.9375, 857.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.