About Janesville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Janesville: Greenwood County Fire 453.1500 MHz, narrow FM, no tone. County-level ems dispatch that covers Janesville: Greenwood County EMS 463.1000 MHz, narrow FM, 131.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Greenwood County Fire talkgroup 2539 (hex 9eb).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Janesville, start with the Virgil site of Kansas Statewide Interoperable Communication System (KSICS), about 8 miles away. Its control channels: 852.1125, 852.4125 MHz.
Data updated .
Greenwood County channels that also cover Janesville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenwood County Fire | South Dispatch | 453.1500 In 458.1500 | FMN | WPYE256 | |
| Greenwood County Fire | North Dispatch | 453.6625 In 458.6625 | FMN | WPYE256 | |
| Greenwood County Fire | Central Dispatch | 460.1000 In 465.1000 | FMN | WPYE256 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Greenwood County EMS | Greenwood County EMS – Dispatch | 463.1000 In 468.1000 | 131.8 PL | FMN | WPGE656 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Greenwood County Fire | County Fire and EMS Dispatch | 2539 | 9eb | D |
Nearest trunked radio sites
Distances are measured from the center of Janesville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Janesville?
We do not have a fire dispatch channel listed specifically for Janesville. The county-level fire dispatch channels in the same county: Greenwood County Fire 453.1500 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Janesville?
We do not have a EMS dispatch channel listed specifically for Janesville. The county-level EMS dispatch channels in the same county: Greenwood County EMS 463.1000 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Janesville?
Yes. The county-level systems that cover Janesville are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Janesville?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Janesville?
For Janesville, start with the Virgil site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.