Skip to content

Murdock Fire and EMS Frequencies

We do not have frequencies listed specifically for Murdock in Butler County, Kansas yet. Countywide channels for Butler County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Wichita (Kansas Statewide Interoperable Communication System (KSICS)), about 13 miles away.

About Murdock Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Murdock: Butler County Fire 155.8200 MHz, narrow FM, 146.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Butler County Fire talkgroup 2269 (hex 8dd).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 21 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Murdock, start with the Wichita site of Kansas Statewide Interoperable Communication System (KSICS), about 13 miles away. Its control channels: 852.1125, 852.4125 MHz.

Data updated .

Butler County channels that also cover Murdock

Fire Dispatch

Fire Dispatch frequencies for Butler County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Butler County FireFire and EMS Page Out155.8200
In 158.8050
146.2 PLFMNKAO312

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Butler County FireButler County Fire – Dispatch22698ddD
Butler County FireFire Event22708deD
Butler County FireFire Event22718dfD
Butler County FireFire Event22728e0D
Butler County FireFire Event22738e1D
Butler County FireFire Event22748e2D
Butler County FireFire Event22758e3D
Butler County FireFire Event22768e4D
Butler County FireFire Event22778e5D
Butler County Fire911 Emergency22798e7D
Butler County FireAtlanta Fire Operations2323913D
Butler County FireBurns Fire Operations233491eD
Butler County FireRefinery Fire Operations236493cD
Butler County FireFire and EMS All Call2425979D
Butler County EMSButler County EMS – Dispatch22938f5D
Butler County EMSEMS Division 1 Call Channel22948f6D
Butler County EMSEMS Division 2 Call Channel22958f7D
Butler County EMSCar-to-Car22978f9D
Butler County EMSEMS Administration22968f8D
Butler County EMSSusan B. Allen Memorial Hospital Emergency Room – Patient Reports22998fbD
Butler County EMSKansas Medical Center Emergency Room – Patient Reports23008fcD

Nearest trunked radio sites

Distances are measured from the center of Murdock.

Wichita · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 13 (hex D) · NAC 1B9 · about 13 mi away
Control 852.1125, 852.4125
Voice 851.6375, 851.8, 852.2625, 852.75, 853.05, 853.475, 853.625, 853.9
Butler County · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 38 (hex 26) · NAC 1BC · about 16 mi away
Control 851.425, 851.7375
Voice 851.325, 851.825, 852.0625, 852.3875, 852.8375, 853.375, 853.675, 853.825
Harvey County · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 42 (hex 2A) · NAC 1B2 · about 22 mi away
Control 856.7625, 857.0125, 857.5125, 857.9875
Voice 854.4875, 854.7375, 855.2375, 856.0125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Murdock?

We do not have a fire dispatch channel listed specifically for Murdock. The county-level fire dispatch channels in the same county: Butler County Fire 155.8200 MHz, narrow FM, 146.2 PL.

Do fire departments and EMS use a trunked radio system in Murdock?

Yes. The county-level systems that cover Murdock are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 21 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Murdock?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Murdock?

For Murdock, start with the Wichita site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.