Skip to content

Richland Fire and EMS Frequencies

We do not have frequencies listed specifically for Richland in Harvey County, Kansas yet. Countywide channels for Harvey County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Harvey County (Kansas Statewide Interoperable Communication System (KSICS)), about 13 miles away.

About Richland Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Richland: Harvey County Fire 154.3250 MHz, narrow FM, 162.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Harvey County Fire talkgroup 2603 (hex a2b).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Richland, start with the Harvey County site of Kansas Statewide Interoperable Communication System (KSICS), about 13 miles away. Its control channels: 856.7625, 857.0125, 857.5125 MHz.

Data updated .

Harvey County channels that also cover Richland

Fire Dispatch

Fire Dispatch frequencies for Harvey County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harvey County FireFire and EMS Tone Out154.3250
In 156.0000
162.2 PLFMNKBP312

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Harvey County FireHarvey County Fire – Dispatch2603a2bD
Harvey County FireFire Operations 5 – Fireground2604a2cD
Harvey County FireFire Operations 6 – Fireground2605a2dD
Harvey County FireFire Operations 7 – Weather Spotters2606a2eD

Nearest trunked radio sites

Distances are measured from the center of Richland.

Harvey County · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 42 (hex 2A) · NAC 1B2 · about 13 mi away
Control 856.7625, 857.0125, 857.5125, 857.9875
Voice 854.4875, 854.7375, 855.2375, 856.0125
Wichita · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 13 (hex D) · NAC 1B9 · about 14 mi away
Control 852.1125, 852.4125
Voice 851.6375, 851.8, 852.2625, 852.75, 853.05, 853.475, 853.625, 853.9
Aulne · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 20 (hex 14) · NAC 1B0 · about 22 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Richland?

We do not have a fire dispatch channel listed specifically for Richland. The county-level fire dispatch channels in the same county: Harvey County Fire 154.3250 MHz, narrow FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Richland?

Yes. The county-level systems that cover Richland are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Richland?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Richland?

For Richland, start with the Harvey County site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.7625, 857.0125, 857.5125, 857.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.