About Pleasant Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Pleasant: Harvey County Fire 154.3250 MHz, narrow FM, 162.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Harvey County Fire talkgroup 2603 (hex a2b).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pleasant, start with the Harvey County site of Kansas Statewide Interoperable Communication System (KSICS), about 12 miles away. Its control channels: 856.7625, 857.0125, 857.5125 MHz.
Data updated .
Harvey County channels that also cover Pleasant
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Harvey County Fire | Fire and EMS Tone Out | 154.3250 In 156.0000 | 162.2 PL | FMN | KBP312 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Harvey County Fire | Harvey County Fire – Dispatch | 2603 | a2b | D |
| Harvey County Fire | Fire Operations 5 – Fireground | 2604 | a2c | D |
| Harvey County Fire | Fire Operations 6 – Fireground | 2605 | a2d | D |
| Harvey County Fire | Fire Operations 7 – Weather Spotters | 2606 | a2e | D |
Nearest trunked radio sites
Distances are measured from the center of Pleasant.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Pleasant?
We do not have a fire dispatch channel listed specifically for Pleasant. The county-level fire dispatch channels in the same county: Harvey County Fire 154.3250 MHz, narrow FM, 162.2 PL.
Do fire departments and EMS use a trunked radio system in Pleasant?
Yes. The county-level systems that cover Pleasant are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Pleasant?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pleasant?
For Pleasant, start with the Harvey County site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.7625, 857.0125, 857.5125, 857.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.