About Benkelman Fire and EMS Frequencies
Quick answer: Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Cheyenne County Fire talkgroup 4598 (hex 11f6).
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Benkelman, start with the St Francis site of Kansas Statewide Interoperable Communication System (KSICS), about 8 miles away. Its control channels: 851.7375, 852.0625 MHz.
Data updated .
Cheyenne County channels that also cover Benkelman
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cheyenne County Fire | County Fire | 4598 | 11f6 | D |
| Cheyenne County EMS | County EMS | 4601 | 11f9 | D |
| Cheyenne County EMS | County EMS Tactical | 4602 | 11fa | D |
| Cheyenne County Hospital | County Hospital ER – Patient Reports | 4603 | 11fb | D |
Nearest trunked radio sites
Distances are measured from the center of Benkelman.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Benkelman?
Yes. The county-level systems that cover Benkelman are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Benkelman?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Benkelman?
For Benkelman, start with the St Francis site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7375, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.