About Logan Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Logan: Sherman County Fire 453.2250 MHz, narrow FM, no tone. County-level ems dispatch that covers Logan: Sherman County EMS 460.5250 MHz, narrow FM, 343 DPL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Sherman County Fire talkgroup 4531 (hex 11b3).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Logan, start with the Edson site of Kansas Statewide Interoperable Communication System (KSICS), about 13 miles away. Its control channels: 852.1125, 852.4125 MHz.
Data updated .
Sherman County channels that also cover Logan
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sherman County Fire | Sherman County Fire – Dispatch | 453.2250 In 458.2250 | FMN | WQFK789 | |
| Sherman County Fire | Sherman County Fire – Dispatch | 460.6125 In 465.6125 | FMN | WQFK789 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sherman County EMS | Sherman County EMS – Dispatch | 460.5250 In 465.5250 | 343 DPL | FMN | WPHS346 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sherman County Hospital | EMS to Hospital – Patient Reports | 463.1500 In 468.1500 | 192.8 PL | FMN | — |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Sherman County Fire | Sherman County Fire – Dispatch | 4531 | 11b3 | D |
| Sherman County Fire | Sherman County Fire – Tactical Channel | 4706 | 1262 | D |
| Sherman County Fire | Brewster Fire Tactical | 4709 | 1265 | D |
| Sherman County EMS | Sherman County EMS – Dispatch | 4527 | 11af | D |
| Sherman County EMS | Sherman County EMS – Tactical Channel | 4528 | 11b0 | D |
| Sherman County EMS | Sherman County EMS – Tactical Channel | 4529 | 11b1 | D |
| Sherman County Hospital | EMS to Hospital ER for Patient Reports | 4530 | 11b2 | D |
Nearest trunked radio sites
Distances are measured from the center of Logan.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Logan?
We do not have a fire dispatch channel listed specifically for Logan. The county-level fire dispatch channels in the same county: Sherman County Fire 453.2250 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Logan?
We do not have a EMS dispatch channel listed specifically for Logan. The county-level EMS dispatch channels in the same county: Sherman County EMS 460.5250 MHz, narrow FM, 343 DPL.
Do fire departments and EMS use a trunked radio system in Logan?
Yes. The county-level systems that cover Logan are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Logan?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Logan?
For Logan, start with the Edson site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.