Skip to content

Washington Fire and EMS Frequencies

We do not have frequencies listed specifically for Washington in Sherman County, Kansas yet. Countywide channels for Sherman County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Edson (Kansas Statewide Interoperable Communication System (KSICS)), about 1 miles away.

About Washington Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Washington: Sherman County Fire 453.2250 MHz, narrow FM, no tone. County-level ems dispatch that covers Washington: Sherman County EMS 460.5250 MHz, narrow FM, 343 DPL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Sherman County Fire talkgroup 4531 (hex 11b3).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Washington, start with the Edson site of Kansas Statewide Interoperable Communication System (KSICS), about 1 miles away. Its control channels: 852.1125, 852.4125 MHz.

Data updated .

Sherman County channels that also cover Washington

Fire Dispatch

Fire Dispatch frequencies for Sherman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sherman County FireSherman County Fire – Dispatch453.2250
In 458.2250
FMNWQFK789
Sherman County FireSherman County Fire – Dispatch460.6125
In 465.6125
FMNWQFK789

EMS Dispatch

EMS Dispatch frequencies for Sherman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sherman County EMSSherman County EMS – Dispatch460.5250
In 465.5250
343 DPLFMNWPHS346

Hospitals & Medical

Hospitals & Medical frequencies for Sherman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Sherman County HospitalEMS to Hospital – Patient Reports463.1500
In 468.1500
192.8 PLFMN—

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Sherman County FireSherman County Fire – Dispatch453111b3D
Sherman County FireSherman County Fire – Tactical Channel47061262D
Sherman County FireBrewster Fire Tactical47091265D
Sherman County EMSSherman County EMS – Dispatch452711afD
Sherman County EMSSherman County EMS – Tactical Channel452811b0D
Sherman County EMSSherman County EMS – Tactical Channel452911b1D
Sherman County HospitalEMS to Hospital ER for Patient Reports453011b2D

Nearest trunked radio sites

Distances are measured from the center of Washington.

Edson · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 39 (hex 27) · NAC 1B4 · about 1 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Colby · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 59 (hex 3B) · NAC 1B1 · about 28 mi away
Control 857.4625, 857.9625
Voice 856.4625, 858.4625, 859.4625, 859.9375
Wallace · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 38 (hex 26) · NAC 1BA · about 28 mi away
Control 852.3125, 852.6125
Voice 851.6, 852.9375, 853.1875, 853.65
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Washington?

We do not have a fire dispatch channel listed specifically for Washington. The county-level fire dispatch channels in the same county: Sherman County Fire 453.2250 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Washington?

We do not have a EMS dispatch channel listed specifically for Washington. The county-level EMS dispatch channels in the same county: Sherman County EMS 460.5250 MHz, narrow FM, 343 DPL.

Do fire departments and EMS use a trunked radio system in Washington?

Yes. The county-level systems that cover Washington are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Washington?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Washington?

For Washington, start with the Edson site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.