About Cutler Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Cutler: Franklin County Fire 155.8350 MHz, narrow FM, 94.8 PL; Homewood Rural Fire District 154.3250 MHz, narrow FM, 136.5 PL; Lincoln Ottawa Harrison Fire District 155.3550 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Cutler Fire talkgroup 818 (hex 332).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup; Kansas Statewide Interoperable Communication System (KSICS): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Cutler, start with the Rantoul site of Kansas Statewide Interoperable Communication System (KSICS), about 2 miles away. Its control channels: 856.6375, 857.5375 MHz.
Data updated .
Cutler trunked talkgroups
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cutler Fire | Cutler Fire Talkaround | 818 | 332 | D |
Franklin County channels that also cover Cutler
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Franklin County Fire | Franklin County Fire – Dispatch (before KSICS) | 155.8350 In 153.7850 | 94.8 PL | FMN | WNBE494 |
| Homewood Rural Fire District | Homewood Rural Fire District – Dispatch | 154.3250 | 136.5 PL | FMN | — |
| Lincoln Ottawa Harrison Fire District | Lincoln Ottawa Harrison Fire District – Dispatch | 155.3550 In 150.7750 | FMN | WPMR452 | |
| Pomona Rural Fire District | Pomona Rural Fire District – Dispatch | 154.4450 | 156.7 PL | FMN | KGW984 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Franklin County Fire | County Fire NW Talkaround | 815 | 32f | D |
| Franklin County Fire | County Fire Talkaround | 816 | 330 | D |
| Franklin County Fire | Lincoln-Ottawa-Harrison Fire Talkaround | 817 | 331 | D |
| Franklin County Fire | Potawatomie Fire Talkaround | 820 | 334 | D |
| Franklin County EMS | Franklin County EMS – Dispatch | 811 | 32b | D |
| Franklin County EMS | County EMS | 804 | 324 | D |
| Franklin County Hospital | Ransom Memorial Hospital ER | 691 | 2b3 | D |
Nearest trunked radio sites
Distances are measured from the center of Cutler.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Cutler?
We do not have a fire dispatch channel listed specifically for Cutler. The county-level fire dispatch channels in the same county: Franklin County Fire 155.8350 MHz, narrow FM, 94.8 PL; Homewood Rural Fire District 154.3250 MHz, narrow FM, 136.5 PL; Lincoln Ottawa Harrison Fire District 155.3550 MHz, narrow FM, no tone; Pomona Rural Fire District 154.4450 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Cutler?
Yes. Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Cutler?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Cutler?
For Cutler, start with the Rantoul site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.6375, 857.5375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cutler fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Cutler are marked encrypted.