Skip to content

Ohio Fire and EMS Frequencies

We do not have frequencies listed specifically for Ohio in Franklin County, Kansas yet. Countywide channels for Franklin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Ottawa (Kansas Statewide Interoperable Communication System (KSICS)), about 6 miles away.

About Ohio Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ohio: Franklin County Fire 155.8350 MHz, narrow FM, 94.8 PL; Homewood Rural Fire District 154.3250 MHz, narrow FM, 136.5 PL; Lincoln Ottawa Harrison Fire District 155.3550 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Franklin County Fire talkgroup 815 (hex 32f).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ohio, start with the Ottawa site of Kansas Statewide Interoperable Communication System (KSICS), about 6 miles away. Its control channels: 856.6625, 857.0125, 857.5625 MHz.

Data updated .

Franklin County channels that also cover Ohio

Fire Dispatch

Fire Dispatch frequencies for Franklin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Franklin County FireFranklin County Fire – Dispatch (before KSICS)155.8350
In 153.7850
94.8 PLFMNWNBE494
Homewood Rural Fire DistrictHomewood Rural Fire District – Dispatch154.3250136.5 PLFMN—
Lincoln Ottawa Harrison Fire DistrictLincoln Ottawa Harrison Fire District – Dispatch155.3550
In 150.7750
FMNWPMR452
Pomona Rural Fire DistrictPomona Rural Fire District – Dispatch154.4450156.7 PLFMNKGW984

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Franklin County FireCounty Fire NW Talkaround81532fD
Franklin County FireCounty Fire Talkaround816330D
Franklin County FireLincoln-Ottawa-Harrison Fire Talkaround817331D
Franklin County FirePotawatomie Fire Talkaround820334D
Franklin County EMSFranklin County EMS – Dispatch81132bD
Franklin County EMSCounty EMS804324D
Franklin County HospitalRansom Memorial Hospital ER6912b3D

Nearest trunked radio sites

Distances are measured from the center of Ohio.

Ottawa · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 48 (hex 30) · NAC 1B8 · about 6 mi away
Control 856.6625, 857.0125, 857.5625
Voice 856.1375, 858.1375, 858.5125
Rantoul · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 51 (hex 33) · NAC 1B1 · about 7 mi away
Control 856.6375, 857.5375
Voice 856.0625, 856.1875
Williamsburg · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 52 (hex 34) · NAC 1B2 · about 8 mi away
Control 857.6375, 858.1125
Voice 857.1375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ohio?

We do not have a fire dispatch channel listed specifically for Ohio. The county-level fire dispatch channels in the same county: Franklin County Fire 155.8350 MHz, narrow FM, 94.8 PL; Homewood Rural Fire District 154.3250 MHz, narrow FM, 136.5 PL; Lincoln Ottawa Harrison Fire District 155.3550 MHz, narrow FM, no tone; Pomona Rural Fire District 154.4450 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Ohio?

Yes. The county-level systems that cover Ohio are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ohio?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ohio?

For Ohio, start with the Ottawa site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.6625, 857.0125, 857.5625 MHz. Program a control channel first; the scanner finds the voice channels from it.