About Benton Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Benton: Hodgeman County Fire 155.7600 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Hodgeman County Fire talkgroup 631 (hex 277).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Benton, start with the Jetmore site of Kansas Statewide Interoperable Communication System (KSICS), about 11 miles away. Its control channels: 852.4875, 852.775 MHz.
Data updated .
Hodgeman County channels that also cover Benton
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hodgeman County Fire | Hodgeman County Fire – Dispatch | 155.7600 In 153.8300 | FMN | WQBE434 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hodgeman County Fire | Fire and EMS Dispatch | 631 | 277 | D |
Nearest trunked radio sites
Distances are measured from the center of Benton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Benton?
We do not have a fire dispatch channel listed specifically for Benton. The county-level fire dispatch channels in the same county: Hodgeman County Fire 155.7600 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Benton?
Yes. The county-level systems that cover Benton are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Benton?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Benton?
For Benton, start with the Jetmore site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.