Skip to content

North Roscoe Fire and EMS Frequencies

We do not have frequencies listed specifically for North Roscoe in Hodgeman County, Kansas yet. Countywide channels for Hodgeman County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Jetmore (Kansas Statewide Interoperable Communication System (KSICS)), about 11 miles away.

About North Roscoe Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers North Roscoe: Hodgeman County Fire 155.7600 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Hodgeman County Fire talkgroup 631 (hex 277).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For North Roscoe, start with the Jetmore site of Kansas Statewide Interoperable Communication System (KSICS), about 11 miles away. Its control channels: 852.4875, 852.775 MHz.

Data updated .

Hodgeman County channels that also cover North Roscoe

Fire Dispatch

Fire Dispatch frequencies for Hodgeman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hodgeman County FireHodgeman County Fire – Dispatch155.7600
In 153.8300
FMNWQBE434

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Hodgeman County FireFire and EMS Dispatch631277D

Nearest trunked radio sites

Distances are measured from the center of North Roscoe.

Jetmore · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 26 (hex 1A) · about 11 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Dighton · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 29 (hex 1D) · NAC 1B1 · about 21 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Ness City · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 25 (hex 19) · NAC 1B7 · about 25 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in North Roscoe?

We do not have a fire dispatch channel listed specifically for North Roscoe. The county-level fire dispatch channels in the same county: Hodgeman County Fire 155.7600 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in North Roscoe?

Yes. The county-level systems that cover North Roscoe are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in North Roscoe?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in North Roscoe?

For North Roscoe, start with the Jetmore site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.