Skip to content

Kendall Fire and EMS Frequencies

We do not have frequencies listed specifically for Kendall in Kearny County, Kansas yet. Countywide channels for Kearny County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lakin (Kansas Statewide Interoperable Communication System (KSICS)), about 9 miles away.

About Kendall Fire and EMS Frequencies

Quick answer: Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Kearny County Fire talkgroup 2591 (hex a1f).

  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Kendall, start with the Lakin site of Kansas Statewide Interoperable Communication System (KSICS), about 9 miles away. Its control channels: 852.4875, 852.775 MHz.

Data updated .

Kearny County channels that also cover Kendall

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Kearny County FireKearny County Fire – Dispatch2591a1fD
Kearny County FireFire Operations2592a20D
Kearny County FireFire Operations2593a21D
Kearny County EMSKearny County EMS – Dispatch2588a1cD
Kearny County EMSEMS Operations2589a1dD
Kearny County EMSEMS Operations2590a1eD

Nearest trunked radio sites

Distances are measured from the center of Kendall.

Lakin · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 32 (hex 20) · NAC 1B3 · about 9 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Syracuse · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 37 (hex 25) · NAC 1B8 · about 21 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
Garden City · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 30 (hex 1E) · about 29 mi away
Control 851.425, 851.575, 851.7375
Voice 851.225, 852.0625, 852.3875, 852.55, 852.7, 853.375, 853.675
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Kendall?

Yes. The county-level systems that cover Kendall are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Kendall?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Kendall?

For Kendall, start with the Lakin site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.4875, 852.775 MHz. Program a control channel first; the scanner finds the voice channels from it.