Skip to content

Big Bow Fire and EMS Frequencies

We do not have frequencies listed specifically for Big Bow in Stanton County, Kansas yet. Countywide channels for Stanton County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Richfield (Kansas Statewide Interoperable Communication System (KSICS)), about 19 miles away.

About Big Bow Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Big Bow: Stanton County Fire 155.6700 MHz, narrow FM, 023 DPL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Stanton County channels that also cover Big Bow

Fire Dispatch

Fire Dispatch frequencies for Stanton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stanton County FireCountywide Paging155.6700
In 158.9100
023 DPLFMNWNIT986

Nearest trunked radio sites

Distances are measured from the center of Big Bow.

Richfield · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 34 (hex 22) · about 19 mi away
Control 852.1125, 852.4125
Voice 851.8, 852.75, 853.475, 853.9
Syracuse · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 37 (hex 25) · NAC 1B8 · about 22 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
Lakin · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 32 (hex 20) · NAC 1B3 · about 22 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Big Bow?

We do not have a fire dispatch channel listed specifically for Big Bow. The county-level fire dispatch channels in the same county: Stanton County Fire 155.6700 MHz, narrow FM, 023 DPL.

What scanner do I need to listen to fire and EMS in Big Bow?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Big Bow?

For Big Bow, start with the Richfield site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.1125, 852.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.