About Bear Creek Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bear Creek: Hamilton County Fire 154.1450 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers Bear Creek: Hamilton County EMS 462.9500 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Hamilton County Fire talkgroup 520 (hex 208).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bear Creek, start with the Syracuse site of Kansas Statewide Interoperable Communication System (KSICS), about 11 miles away. Its control channels: 851.55, 852.3375 MHz.
Data updated .
Hamilton County channels that also cover Bear Creek
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County Fire | Hamilton County Fire – Dispatch (Dispatch before KSICS) | 154.1450 In 150.7900 | 103.5 PL | FMN | WPRF281 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County EMS | Hamilton County EMS – Dispatch | 462.9500 In 467.9500 | FMN | WYR534 | |
| Hamilton County EMS | Hamilton County EMS – Dispatch | 462.9750 In 467.9750 | FMN | WYR534 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hamilton County Fire | Hamilton County Fire – Dispatch | 520 | 208 | D |
| Hamilton County EMS | Hamilton County EMS – Dispatch | 519 | 207 | D |
Nearest trunked radio sites
Distances are measured from the center of Bear Creek.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bear Creek?
We do not have a fire dispatch channel listed specifically for Bear Creek. The county-level fire dispatch channels in the same county: Hamilton County Fire 154.1450 MHz, narrow FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Bear Creek?
We do not have a EMS dispatch channel listed specifically for Bear Creek. The county-level EMS dispatch channels in the same county: Hamilton County EMS 462.9500 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Bear Creek?
Yes. The county-level systems that cover Bear Creek are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bear Creek?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bear Creek?
For Bear Creek, start with the Syracuse site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.