Skip to content

Peters Fire and EMS Frequencies

We do not have frequencies listed specifically for Peters in Kingman County, Kansas yet. Countywide channels for Kingman County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sharon (Kansas Statewide Interoperable Communication System (KSICS)), about 11 miles away.

About Peters Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Peters: Kingman [City] 453.7625 MHz, narrow FM, 205 DPL. County-level ems dispatch that covers Peters: Kingman County EMS 463.1500 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Kingman County Fire talkgroup 598 (hex 256).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Peters, start with the Sharon site of Kansas Statewide Interoperable Communication System (KSICS), about 11 miles away. Its control channels: 851.55, 852.3375 MHz.

Data updated .

Kingman County channels that also cover Peters

Fire Dispatch

Fire Dispatch frequencies for Kingman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kingman [City]Kingman [City] – Dispatch453.7625
In 458.7625
205 DPLFMNWQCY536

EMS Dispatch

EMS Dispatch frequencies for Kingman County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kingman County EMSKingman County EMS – Dispatch463.1500
In 468.1500
192.8 PLFMNWPGE657

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Kingman County FireKingman County Fire – Dispatch598256D
Kingman County EMSKingman County EMS – Dispatch597255D

Nearest trunked radio sites

Distances are measured from the center of Peters.

Sharon · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 18 (hex 12) · about 11 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
Kingman · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 61 (hex 3D) · about 11 mi away
Control 856.7125
Voice 854.0125, 857.4375, 857.7625, 858.0875, 858.4375
Preston · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 16 (hex 10) · NAC 1BA · about 23 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Peters?

We do not have a fire dispatch channel listed specifically for Peters. The county-level fire dispatch channels in the same county: Kingman [City] 453.7625 MHz, narrow FM, 205 DPL.

What frequency does EMS or the ambulance service use in Peters?

We do not have a EMS dispatch channel listed specifically for Peters. The county-level EMS dispatch channels in the same county: Kingman County EMS 463.1500 MHz, narrow FM, 192.8 PL.

Do fire departments and EMS use a trunked radio system in Peters?

Yes. The county-level systems that cover Peters are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Peters?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Peters?

For Peters, start with the Sharon site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.