About Rural Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Rural: Kingman [City] 453.7625 MHz, narrow FM, 205 DPL. County-level ems dispatch that covers Rural: Kingman County EMS 463.1500 MHz, narrow FM, 192.8 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Kingman County Fire talkgroup 598 (hex 256).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Rural, start with the Preston site of Kansas Statewide Interoperable Communication System (KSICS), about 14 miles away. Its control channels: 852.2375, 852.9 MHz.
Data updated .
Kingman County channels that also cover Rural
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kingman [City] | Kingman [City] – Dispatch | 453.7625 In 458.7625 | 205 DPL | FMN | WQCY536 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Kingman County EMS | Kingman County EMS – Dispatch | 463.1500 In 468.1500 | 192.8 PL | FMN | WPGE657 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Kingman County Fire | Kingman County Fire – Dispatch | 598 | 256 | D |
| Kingman County EMS | Kingman County EMS – Dispatch | 597 | 255 | D |
Nearest trunked radio sites
Distances are measured from the center of Rural.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Rural?
We do not have a fire dispatch channel listed specifically for Rural. The county-level fire dispatch channels in the same county: Kingman [City] 453.7625 MHz, narrow FM, 205 DPL.
What frequency does EMS or the ambulance service use in Rural?
We do not have a EMS dispatch channel listed specifically for Rural. The county-level EMS dispatch channels in the same county: Kingman County EMS 463.1500 MHz, narrow FM, 192.8 PL.
Do fire departments and EMS use a trunked radio system in Rural?
Yes. The county-level systems that cover Rural are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Rural?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Rural?
For Rural, start with the Preston site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.