Skip to content

Lincoln Fire and EMS Frequencies

We do not have frequencies listed specifically for Lincoln in Linn County, Kansas yet. Countywide channels for Linn County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Parker (Kansas Statewide Interoperable Communication System (KSICS)), about 15 miles away.

About Lincoln Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lincoln: Linn County Fire 154.1900 MHz, NXDN48, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Linn County EMS talkgroup 688 (hex 2b0).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lincoln, start with the Parker site of Kansas Statewide Interoperable Communication System (KSICS), about 15 miles away. Its control channels: 851.7125, 852.4875 MHz.

Data updated .

Linn County channels that also cover Lincoln

Fire Dispatch

Fire Dispatch frequencies for Linn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Linn County FireLinn County Fire – Dispatch154.1900
In 158.7825
NXDN48WPZR391

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Linn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Linn County FireLinn County Fire – Fire Ground153.9500
In 155.9025
115 DPLFMNWPZR391

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Linn County EMSLinn County EMS – Dispatch6882b0D
Linn County EMSLinn County EMS – Tactical Channel6892b1D

Nearest trunked radio sites

Distances are measured from the center of Lincoln.

Parker · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 7 (hex 7) · NAC 1BA · about 15 mi away
Control 851.7125, 852.4875
Voice 851.4625, 852.15, 852.775, 853.425, 853.575, 853.725
Miami County Simulcast · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 56 (hex 38) · NAC 1B6 · about 18 mi away
Control 854.8875, 855.8125
Voice 854.3125, 858.7875, 859.3625, 859.7875
Paola · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 6 (hex 6) · NAC 1B4 · about 25 mi away
Control 851.575, 851.9375
Voice 851.2, 852.2875, 853.175, 853.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lincoln?

We do not have a fire dispatch channel listed specifically for Lincoln. The county-level fire dispatch channels in the same county: Linn County Fire 154.1900 MHz, NXDN48, no tone.

Do fire departments and EMS use a trunked radio system in Lincoln?

Yes. The county-level systems that cover Lincoln are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lincoln?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lincoln?

For Lincoln, start with the Parker site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7125, 852.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.