About Mertilla Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Mertilla: Meade County Fire 155.7150 MHz, narrow FM, 103.5 PL. County-level ems dispatch that covers Mertilla: Meade County EMS 462.9750 MHz, narrow FM, no tone. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Meade County Fire talkgroup 2950 (hex b86).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups; Meade County Public Safety: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mertilla, start with the Collano site of Kansas Statewide Interoperable Communication System (KSICS), about 7 miles away. Its control channels: 851.55, 852.3375 MHz.
Data updated .
Meade County channels that also cover Mertilla
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meade County Fire | Fire and Severe Weather Spotters | 155.7150 In 153.9950 | 103.5 PL | FMN | KNHH227 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meade County EMS | Meade County EMS – Dispatch (Dispatch before Trunked System) | 462.9750 In 467.9750 | FMN | WPAD887 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Meade County EMS | Meade County EMS – Tactical Channel (before Trunked System) | 463.1750 In 468.1750 | 192.8 PL | FMN | WYR532 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Meade County Fire | County Fire Dispatch | 2950 | b86 | D |
| Meade County EMS | Meade County EMS – Dispatch | 2953 | b89 | D |
Meade County Public Safety
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Meade County Fire | Meade County Fire – Dispatch | 120 | 78 | D |
| Meade County EMS | Meade County EMS – Dispatch | 110 | 6e | D |
Nearest trunked radio sites
Distances are measured from the center of Mertilla.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Mertilla?
We do not have a fire dispatch channel listed specifically for Mertilla. The county-level fire dispatch channels in the same county: Meade County Fire 155.7150 MHz, narrow FM, 103.5 PL.
What frequency does EMS or the ambulance service use in Mertilla?
We do not have a EMS dispatch channel listed specifically for Mertilla. The county-level EMS dispatch channels in the same county: Meade County EMS 462.9750 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Mertilla?
Yes. The county-level systems that cover Mertilla are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups; Meade County Public Safety: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mertilla?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mertilla?
For Mertilla, start with the Collano site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.