About Lockport Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lockport: Haskell County Fire 453.8000 MHz, narrow FM, no tone. County-level ems dispatch that covers Lockport: Haskell County EMS 462.9500 MHz, narrow FM, CSQ. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Haskell County EMS talkgroup 524 (hex 20c).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
Data updated .
Haskell County channels that also cover Lockport
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Haskell County Fire | Haskell County Fire – Dispatch (Dispatch before KSICS) | 453.8000 In 458.8000 | FMN | WPYE258 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Haskell County EMS | Haskell County EMS – Dispatch (Dispatch before KSICS) | 462.9500 In 467.9500 | CSQ | FMN | WNII782 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Haskell County EMS | Haskell County EMS – Dispatch | 524 | 20c | D |
| Haskell County EMS | Haskell County EMS – Page | 538 | 21a | D |
| Haskell County EMS | Haskell County EMS – Tactical Channel | 525 | 20d | D |
| Haskell County EMS | EMS Medical | 526 | 20e | D |
Nearest trunked radio sites
Distances are measured from the center of Lockport.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lockport?
We do not have a fire dispatch channel listed specifically for Lockport. The county-level fire dispatch channels in the same county: Haskell County Fire 453.8000 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Lockport?
We do not have a EMS dispatch channel listed specifically for Lockport. The county-level EMS dispatch channels in the same county: Haskell County EMS 462.9500 MHz, narrow FM, CSQ.
Do fire departments and EMS use a trunked radio system in Lockport?
Yes. The county-level systems that cover Lockport are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Lockport?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Lockport?
For Lockport, start with the Collano site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.55, 852.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.