Skip to content

Seward Fire and EMS Frequencies

We do not have frequencies listed specifically for Seward in Seward County, Kansas yet. Countywide channels for Seward County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Sublette (Kansas Statewide Interoperable Communication System (KSICS)), about 11 miles away.

About Seward Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Seward: Seward County Fire 158.7450 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Seward: Seward County EMS 463.1750 MHz, narrow FM, 167.9 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Seward County Fire talkgroup 578 (hex 242).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.

Data updated .

Seward County channels that also cover Seward

Fire Dispatch

Fire Dispatch frequencies for Seward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seward County FireFire VHF158.7450
In 153.7550
146.2 PLFMNKNIG939
Seward County FireSeward County Fire – Dispatch453.9500
In 458.9500
110.9 PLFMNKNIG939

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Seward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seward County FireFire Mutual Aid453.4250
In 458.4250
192.8 PLFMNKNIG939
Seward County FireFire Mutual Aid453.7000
In 458.7000
167.9 PLFMNWNBJ765
Seward County FireFire Mutual Aid460.0500
In 465.0500
127.3 PLFMNKNIG939
Seward County FireFire Mutual Aid460.3250
In 465.3250
241.8 PLFMNKNIG939
Seward County FireSeward County Fire – Fire Ground464.5000103.5 PLFMN—

EMS Dispatch

EMS Dispatch frequencies for Seward County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Seward County EMSSeward County EMS – Dispatch463.1750
In 468.1750
167.9 PLFMNKNIG939

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Seward County FireRural Fire Dispatch578242D
Seward County EMSSeward County EMS – Dispatch582246D

Nearest trunked radio sites

Distances are measured from the center of Seward.

Sublette · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 60 (hex 3C) · about 11 mi away
Voice 856.4625, 857.4625, 857.9625, 858.4625, 859.4625, 859.9375
Moscow · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 33 (hex 21) · NAC 1B6 · about 13 mi away
Control 852.2375
Voice 851.9, 852.9, 853.25, 853.5, 853.925
Liberal · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 57 (hex 39) · about 16 mi away
Control 856.2125
Voice 854.9875, 857.2125, 857.7625, 858.2125, 858.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Seward?

We do not have a fire dispatch channel listed specifically for Seward. The county-level fire dispatch channels in the same county: Seward County Fire 158.7450 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Seward?

We do not have a EMS dispatch channel listed specifically for Seward. The county-level EMS dispatch channels in the same county: Seward County EMS 463.1750 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Seward?

Yes. The county-level systems that cover Seward are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Seward?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Seward?

For Seward, start with the Moscow site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.