About Fargo Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Fargo: Seward County Fire 158.7450 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Fargo: Seward County EMS 463.1750 MHz, narrow FM, 167.9 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Seward County Fire talkgroup 578 (hex 242).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Fargo, start with the Liberal site of Kansas Statewide Interoperable Communication System (KSICS), about 7 miles away. Its control channels: 856.2125 MHz.
Data updated .
Seward County channels that also cover Fargo
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seward County Fire | Fire VHF | 158.7450 In 153.7550 | 146.2 PL | FMN | KNIG939 |
| Seward County Fire | Seward County Fire – Dispatch | 453.9500 In 458.9500 | 110.9 PL | FMN | KNIG939 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seward County Fire | Fire Mutual Aid | 453.4250 In 458.4250 | 192.8 PL | FMN | KNIG939 |
| Seward County Fire | Fire Mutual Aid | 453.7000 In 458.7000 | 167.9 PL | FMN | WNBJ765 |
| Seward County Fire | Fire Mutual Aid | 460.0500 In 465.0500 | 127.3 PL | FMN | KNIG939 |
| Seward County Fire | Fire Mutual Aid | 460.3250 In 465.3250 | 241.8 PL | FMN | KNIG939 |
| Seward County Fire | Seward County Fire – Fire Ground | 464.5000 | 103.5 PL | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seward County EMS | Seward County EMS – Dispatch | 463.1750 In 468.1750 | 167.9 PL | FMN | KNIG939 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Seward County Fire | Rural Fire Dispatch | 578 | 242 | D |
| Seward County EMS | Seward County EMS – Dispatch | 582 | 246 | D |
Nearest trunked radio sites
Distances are measured from the center of Fargo.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Fargo?
We do not have a fire dispatch channel listed specifically for Fargo. The county-level fire dispatch channels in the same county: Seward County Fire 158.7450 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Fargo?
We do not have a EMS dispatch channel listed specifically for Fargo. The county-level EMS dispatch channels in the same county: Seward County EMS 463.1750 MHz, narrow FM, 167.9 PL.
Do fire departments and EMS use a trunked radio system in Fargo?
Yes. The county-level systems that cover Fargo are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Fargo?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Fargo?
For Fargo, start with the Liberal site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 856.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.