Skip to content

Custer Fire and EMS Frequencies

We do not have frequencies listed specifically for Custer in Mitchell County, Kansas yet. Countywide channels for Mitchell County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Beloit (Kansas Statewide Interoperable Communication System (KSICS)), about 18 miles away.

About Custer Fire and EMS Frequencies

Quick answer: Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Mitchell County Fire talkgroup 4692 (hex 1254).

  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Custer, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS), about 18 miles away. Its control channels: 852.3125, 852.6125 MHz.

Data updated .

Mitchell County channels that also cover Custer

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Mitchell County FireMitchell County Fire – Dispatch46921254D
Mitchell County EMSMitchell County EMS – Dispatch46931255D

Nearest trunked radio sites

Distances are measured from the center of Custer.

Beloit · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 23 (hex 17) · NAC 1B1 · about 18 mi away
Control 852.3125, 852.6125
Voice 851.325, 852.9375, 853.1875, 853.65
Osborne · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 25 (hex 19) · NAC 1B7 · about 19 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
Russell · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 26 (hex 1A) · NAC 1B7 · about 32 mi away
Control 852.4625, 852.725
Voice 851.3, 851.8375, 852.975, 853.4, 853.8625, 853.975
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Custer?

Yes. The county-level systems that cover Custer are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Custer?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Custer?

For Custer, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.