About Eureka Fire and EMS Frequencies
Quick answer: Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Mitchell County Fire talkgroup 4692 (hex 1254).
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Eureka, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS), about 10 miles away. Its control channels: 852.3125, 852.6125 MHz.
Data updated .
Mitchell County channels that also cover Eureka
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Mitchell County Fire | Mitchell County Fire – Dispatch | 4692 | 1254 | D |
| Mitchell County EMS | Mitchell County EMS – Dispatch | 4693 | 1255 | D |
Nearest trunked radio sites
Distances are measured from the center of Eureka.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Eureka?
Yes. The county-level systems that cover Eureka are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Eureka?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Eureka?
For Eureka, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.