Skip to content

Stanton Fire and EMS Frequencies

We do not have frequencies listed specifically for Stanton in Ottawa County, Kansas yet. Countywide channels for Ottawa County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Beloit (Kansas Statewide Interoperable Communication System (KSICS)), about 15 miles away.

About Stanton Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Stanton: Ottawa County Fire 453.3000 MHz, narrow FM, 107.2 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Ottawa County Fire talkgroup 5210 (hex 145a).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Stanton, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS), about 15 miles away. Its control channels: 852.3125, 852.6125 MHz.

Data updated .

Ottawa County channels that also cover Stanton

Fire Dispatch

Fire Dispatch frequencies for Ottawa County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ottawa County FireFire Tone Out453.3000
In 458.3000
107.2 PLFMNWNLU429
Ottawa County FireOttawa County Fire – Dispatch (Dispatch before KSICS)453.5500
In 458.5500
146.2 PLFMNWPUD315

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Ottawa County FireOttawa County Fire – Dispatch5210145aD
Ottawa County FireFire Event5211145bD
Ottawa County FireFire Event5212145cD
Ottawa County FireFire Event5213145dD

Nearest trunked radio sites

Distances are measured from the center of Stanton.

Beloit · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 23 (hex 17) · NAC 1B1 · about 15 mi away
Control 852.3125, 852.6125
Voice 851.325, 852.9375, 853.1875, 853.65
Concordia · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 17 (hex 11) · NAC 1B1 · about 16 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
KSU Campus · Riley County
RFSS 37 · Site 37 (hex 25) · NAC 025 · about 22 mi away
Control 856.0125, 856.9375, 857.7625, 858.2625, 858.7625, 859.2625, 859.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Stanton?

We do not have a fire dispatch channel listed specifically for Stanton. The county-level fire dispatch channels in the same county: Ottawa County Fire 453.3000 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Stanton?

Yes. The county-level systems that cover Stanton are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Stanton?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Stanton?

For Stanton, start with the Beloit site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.3125, 852.6125 MHz. Program a control channel first; the scanner finds the voice channels from it.