Skip to content

Browns Grove Fire and EMS Frequencies

We do not have frequencies listed specifically for Browns Grove in Pawnee County, Kansas yet. Countywide channels for Pawnee County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rush Center (Kansas Statewide Interoperable Communication System (KSICS)), about 19 miles away.

About Browns Grove Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Browns Grove: Larned State Hospital 858.5375 MHz, FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Pawnee County channels that also cover Browns Grove

Fire Dispatch

Fire Dispatch frequencies for Pawnee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Larned State HospitalLSH Security and Fire858.5375
In 813.5375
FMWPGU298

Nearest trunked radio sites

Distances are measured from the center of Browns Grove.

Rush Center · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 22 (hex 16) · NAC 1B9 · about 19 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
Kinsley · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 62 (hex 3E) · NAC 1B0 · about 22 mi away
Control 854.5125, 856.0125
Ness City · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 25 (hex 19) · NAC 1B7 · about 23 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Browns Grove?

We do not have a fire dispatch channel listed specifically for Browns Grove. The county-level fire dispatch channels in the same county: Larned State Hospital 858.5375 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Browns Grove?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Browns Grove?

For Browns Grove, start with the Rush Center site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 851.7375, 852.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.