Skip to content

Sawmill Fire and EMS Frequencies

We do not have frequencies listed specifically for Sawmill in Pawnee County, Kansas yet. Countywide channels for Pawnee County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kinsley (Kansas Statewide Interoperable Communication System (KSICS)), about 17 miles away.

About Sawmill Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sawmill: Larned State Hospital 858.5375 MHz, FM, no tone.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Pawnee County channels that also cover Sawmill

Fire Dispatch

Fire Dispatch frequencies for Pawnee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Larned State HospitalLSH Security and Fire858.5375
In 813.5375
FMWPGU298

Nearest trunked radio sites

Distances are measured from the center of Sawmill.

Kinsley · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 62 (hex 3E) · NAC 1B0 · about 17 mi away
Control 854.5125, 856.0125
Rush Center · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 22 (hex 16) · NAC 1B9 · about 24 mi away
Control 851.7375, 852.0625
Voice 851.425, 852.3875, 853.375, 853.675
Spearville · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 1 · Site 47 (hex 2F) · about 24 mi away
Control 858.4875
Voice 855.7125, 857.9375, 858.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sawmill?

We do not have a fire dispatch channel listed specifically for Sawmill. The county-level fire dispatch channels in the same county: Larned State Hospital 858.5375 MHz, FM, no tone.

What scanner do I need to listen to fire and EMS in Sawmill?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sawmill?

For Sawmill, start with the Kinsley site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 854.5125, 856.0125 MHz. Program a control channel first; the scanner finds the voice channels from it.