Skip to content

Freedom Fire and EMS Frequencies

We do not have frequencies listed specifically for Freedom in Phillips County, Kansas yet. Countywide channels for Phillips County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Phillipsburg (Kansas Statewide Interoperable Communication System (KSICS)), about 2 miles away.

About Freedom Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Freedom: Phillips County Fire 154.2500 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Phillips County Fire talkgroup 4576 (hex 11e0).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Freedom, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS), about 2 miles away. Its control channels: 852.2375, 852.9 MHz.

Data updated .

Phillips County channels that also cover Freedom

Fire Dispatch

Fire Dispatch frequencies for Phillips County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phillips County FireFire and EMS (before KSICS)154.2500
In 153.7700
156.7 PLFMNWNXD566
Phillips County FireFire and EMS (Dispatch before KSICS)154.3850
In 150.7750
431 DPLFMNWPVX391

Kansas Statewide Interoperable Communication System (KSICS)

Kansas Statewide Interoperable Communication System (KSICS) talkgroups
AgencyDescriptionTalkgroupHexMode
Phillips County FirePhillips County Fire – Dispatch457611e0D
Phillips County EMSPhillips County EMS – Dispatch457711e1D

Nearest trunked radio sites

Distances are measured from the center of Freedom.

Phillipsburg · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 28 (hex 1C) · about 2 mi away
Control 852.2375, 852.9
Voice 851.9, 853.25, 853.5, 853.925
Cora · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 27 (hex 1B) · about 32 mi away
Control 851.55, 852.3375
Voice 851.275, 853.175, 853.35, 853.6125
Norton · Kansas Statewide Interoperable Communication System (KSICS)
RFSS 2 · Site 33 (hex 21) · about 33 mi away
Control 852.4875, 852.775
Voice 851.7125, 853.075, 853.425, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Freedom?

We do not have a fire dispatch channel listed specifically for Freedom. The county-level fire dispatch channels in the same county: Phillips County Fire 154.2500 MHz, narrow FM, 156.7 PL.

Do fire departments and EMS use a trunked radio system in Freedom?

Yes. The county-level systems that cover Freedom are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Freedom?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Freedom?

For Freedom, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.