About Granite Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Granite: Phillips County Fire 154.2500 MHz, narrow FM, 156.7 PL. Trunked: Kansas Statewide Interoperable Communication System (KSICS), for example Phillips County Fire talkgroup 4576 (hex 11e0).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Granite, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS), about 9 miles away. Its control channels: 852.2375, 852.9 MHz.
Data updated .
Phillips County channels that also cover Granite
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Phillips County Fire | Fire and EMS (before KSICS) | 154.2500 In 153.7700 | 156.7 PL | FMN | WNXD566 |
| Phillips County Fire | Fire and EMS (Dispatch before KSICS) | 154.3850 In 150.7750 | 431 DPL | FMN | WPVX391 |
Kansas Statewide Interoperable Communication System (KSICS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Phillips County Fire | Phillips County Fire – Dispatch | 4576 | 11e0 | D |
| Phillips County EMS | Phillips County EMS – Dispatch | 4577 | 11e1 | D |
Nearest trunked radio sites
Distances are measured from the center of Granite.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Granite?
We do not have a fire dispatch channel listed specifically for Granite. The county-level fire dispatch channels in the same county: Phillips County Fire 154.2500 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Granite?
Yes. The county-level systems that cover Granite are Fire and EMS talkgroups are listed for Kansas Statewide Interoperable Communication System (KSICS): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Granite?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Granite?
For Granite, start with the Phillipsburg site of Kansas Statewide Interoperable Communication System (KSICS). Its control channels are 852.2375, 852.9 MHz. Program a control channel first; the scanner finds the voice channels from it.